Model – 126 LITE – 120 volt INSIDE DIMENSIONS: 12.5″ X 12.5″ WIDE X 6″ DEEP, FIRES TO 1700° F The 126 Lite’s design is a combination of brick and fiber to provide a large area for firing in a lighter-weight kiln to reduce shipping costs. The 126 Lite is built with a brick lid and fiber walls. The element used for firing the kiln is housed in the lid and a 3 key electronic controller equips the kiln for precise firings. Four user programs are available for ramp-hold programming and information is entered by scrolling through the up and down arrows on the controller. Because fiber walls will smoke and emit odors on the first firing, we suggest the first firing be done outside. Future firings will not be affected. The model comes with a short stand, peephole plug, instruction manual, and warranty card. Two-year warranty. Upgrade to the 12-key digital KilnStar controller for more ramp-hold user programs and multiple features including delay start, preheat, skip step, and many more for precise firings every time. Messages and Information are available for reviewing a firing profile before or during the firing, and for viewing the current segment the firing is in. Other options include a bead door, quartz glass viewing window, Type S thermocouple, vent, and much more! Furniture Kits for 120-volt glass fusing and PMC kilns include two layers of shelving for stacking ware, assorted small square posts, ceramic paper, and a one-pound bag of kiln wash. Choose the standard furniture kit or build your own with shelves and posts in the quantities required. Specific Kiln Information MODEL 126 LITE WIRING SPECIFICATIONS Equipped with Lid Lift Assist N/A 120 Volts Inside Chamber Dimensions w x d x h (inches) 12.5 x 12.5 x 6 15 Amps Cubic Feet .54 1800 Watts Outside Dimensions with Stand or Frame w x d x h (inches) 19.5 x 16 x 20 20 Amp Breaker Required Brick Thickness Fiber Walls Plug Configuration: NEMA 5-15 Maximum Temperature 1700°F/927°C Copper Wire Size: #12, #10 if the circuit is longer than 40 ft Est Ship Wt 60 lbs
